Nissan Sentra B18 (2020-2025) Service Manual: B2202-11 Fuel Sender
Dtc Description
DTC Description
DTC DETECTION LOGIC
|
DTC No. |
CONSULT screen terms (Trouble diagnosis content) |
DTC detected condition |
||
|---|---|---|---|---|
|
B2202-11 |
Fuel level sensor (Fuel level sensor) |
Diagnosis condition |
When ignition switch is ON. |
|
|
Signal (terminal) |
Fuel level sensor signal |
|||
|
Threshold |
Short circuit |
|||
|
Diagnosis delay time |
— |
|||
POSSIBLE CAUSE
-
Fuel level sensor unit and fuel pump
-
Combination meter
-
Harness or connectors
FAIL-SAFE
Low fuel level warning displays
Confirmation Procedure
Confirmation Procedure
-
PERFORM DTC CONFIRMATION PROCEDURE
-
CONSULT-
Ignition switch ON.
-
Select “Self Diagnostic Result” mode of “METER/M&A”.
-
Is DTC B2202-11 detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
-
Dtc Diagnosis Procedure
DTC Diagnosis Procedure
-
CHECK FUEL LEVEL SENSOR SIGNAL CIRCUIT
-
Check the fuel level sensor signal circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES >>Replace combination meter. Refer to Removal and Installation.
NO >>Repair or replace malfunctioning parts.
-
Other materials:
Air Pressure Monitor
Consult Function (bcm - Air Pressure Monitor)
CONSULT Function
(BCM - AIR PRESSURE MONITOR)
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions. Refer to the Signal Tech II User
Guide for additional information.
Activate and ...
Driver Assistance Buzzer Circuit
Component Function Check
Component Function Check
CHECK DRIVER ASSISTANCE BUZZER
CONSULT
Select “ADAS buzzer 2” in
“Active Test” mode of “ICC/ADAS
2”.
Check that the function operates
...
B2c20-12 Starter Cut Relay
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen items
(Trouble diagnosis
content)
DTC detecting condition
...