Factory-style information for owners and repair work

Nissan Sentra techinfo

Find Nissan Sentra owner information, maintenance instructions, technical references, service procedures and useful repair pages in one clean online library.

Nissan Sentra B18 (2020-2025) Service Manual: B120e-55 Ipdm E/r

Dtc Description

DTC Description

DTC DETECTION LOGIC

DTC No.

CONSULT screen items

(Trouble diagnosis content)

DTC detection condition

B120E-55

IPDM E/R

(Intelligent power distribution module engine room)

[NOT CONFIGURED]

Diagnosis condition

When ignition switch is ON

Signal (terminal)

Threshold

Configuration is not performed

Diagnosis delay time

1 second or more

POSSIBLE CAUSE

  • Configuration is not performed.

  • IPDM E/R

FAIL-SAFE

Dtc Confirmation Procedure

DTC Confirmation Procedure
  1. PERFORM DTC CONFIRMATION PROCEDURE

    1. CONSULT

      1. Ignition switch ON.

      2. Select “Self Diagnostic Result” mode of “IPDM E/R”.

    Is DTC detected?

    YES>>

    Refer to DTC Diagnosis Procedure.

    NO>>

    To check malfunction symptom before repair: Refer to Intermittent Incident.

    NO>>

    Confirmation after repair: Inspection End.

Dtc Diagnosis Procedure

DTC Diagnosis Procedure
  1. PERFORM CONFIGURATION (IPDM E/R)

    1. CONSULT

      1. Perform configuration (IPDM E/R). Refer to Work Procedure.

      2. Perform DTC confirmation procedure. Refer to DTC Confirmation Procedure.

    Is DTC detected?

    YES >>

    Replace IPDM E/R. Refer to Removal and Installation.

    NO >>

    Inspection End.

    B120e-04 Ipdm E/r
    Dtc Description DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items ...

    B20dd-73 Ign Relay on Circ
    Dtc Description DTC Description The IPDM E/R operates the ignition relay-1 when it receives an ignition switch ON signal from the BCM via CAN communication. Tu ...

    Other materials:

    Component Parts
    Cvt Control System Component Parts Location Component Parts Location Shifter assembly Transaxle assembly Pedal periphery a ...

    B20dd-73 Ign Relay on Circ
    Dtc Description DTC Description The IPDM E/R operates the ignition relay-1 when it receives an ignition switch ON signal from the BCM via CAN communication. Turn the ignition relay-1 OFF by pressing the push-button ignition switch once when the Nissan ...

    U0075 Control Module Comm Bus C Off
    Dtc Description DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition ...