Nissan Sentra B18 (2020-2025) Service Manual: Ascd Steering Switch
Component Inspection
Component Inspection
-
CHECK ASCD STEERING SWITCH
-
Turn ignition switch OFF.
-
Disconnect combination switch (spiral cable) harness connector.
-
Check the resistance between combination switch harness connector terminals as per the following conditions.
Combination switch
(Spiral cable)
Condition
Resistance
(Approx.)
Connector
+
−
Terminal
M96
21
36
MAIN switch: Pressed
0 Ω
CANCEL switch: Pressed
250 Ω
SET − switch: Pressed
660 Ω
RES + switch: Pressed
1,480 Ω
All ASCD steering switches: Released
4,000 Ω
Is the inspection result normal?
YES >>INSPECTION END
NO >>Replace ASCD steering switch. Refer to Removal and Installation.
-
Other materials:
Intelligent Key Unit. Removal and Installation
Removal and Installation
Removal and Installation
REMOVAL
CAUTION:
Be sure to perform “ADDITIONAL
SERVICE WHEN REPLACING INTELLIGENT KEY UNIT” when replacing
Intelligent Key unit. Refer to Work Procedure.
Remove
instrument panel assembly. Refer to Removal and ...
Low Tire Pressure Warning Lamp Does Not Turn Off
Symptom Description
Symptom Description
The low tire pressure warning lamp does not turn
OFF after several seconds is passed after the engine starts.
Diagnosis Procedure
Diagnosis Procedure
CHECK TIRE PRESSURE
Ignition switch ...
Clutch. Removal and Installation
Clutch Pedal
Exploded View
Exploded View
1.
Clutch pedal
2.
Clutch master cylinder
...