Nissan Sentra Service Manual: Removal and installation

Body component parts

Moonroof panel assembly Roof panel assembly Front roof rail Roof rail Rear roof rail Moonroof frame assembly Hood assembly Front fender (RH, LH) Outer front door panel (RH, LH) ...

Corrosion protection

Description To provide improved corrosion prevention, the following anti-corrosive measures have been implemented in NISSAN production plants. When repairing or replacing body panels, it is nece ...

Other materials:

Installing front license plate
Use the following steps to mount the front license plate: Make holes on the plastic finisher at the location mark (small dimple) using a 0.20 in (5 mm) drill. Apply light pressure to the drill. Install the license plate holder using the two screws provided with the holder. Mount ...

Main power window and door lock/ unlock switch
Removal and Installation REMOVAL Release the pawls using a suitable tool and lift the main power window and door lock/unlock switch and finisher as an assembly and remove. Disconnect the harness connector from the main power window and door lock/unlock switch. Release the four pawls ...

Front suspension assembly
Inspection COMPONENT PART Check the mounting conditions (looseness, backlash) of each component. Verify the component conditions (wear, damage) are normal. Ball Joint Axial End Play Set the front wheels in a straight-ahead position. Hold the axle side of the transverse link, and check th ...