Nissan Sentra Service Manual: Driver side power window does not operate

Nissan Sentra Service Manual / Body exterior, doors, roof & vehicle security / Power window control system / Symptom diagnosis / Driver side power window does not operate

Diagnosis Procedure

1.Check front power window motor (driver side)

Check front power window motor (driver side).

Refer to pwc-43, "driver side : diagnosis procedure".

Is the inspection result normal? Yes >> go to 2.

No >> repair or replace the malfunctioning parts.

2.Replace power window main switch

Replace power window main switch.
Confirm the operation after replacement.

Is the result normal? Yes >> inspection end

NO >> Check intermittent incident. Refer to GI-39, "Intermittent Incident".

Power windows do not operate with power window main switch

Diagnosis Procedure 1.Check bcm power supply and ground circuit Check bcm power supply and ground circuit. Refer to bcs-67, "diagnosis procedure" (with intelligent key) or bcs-120, &q ...

Front passenger side power window does not operate

When both power window main switch and front power window switch are operated WHEN BOTH POWER WINDOW MAIN SWITCH AND FRONT POWER WINDOW SWITCH ARE OPERATED : Diagnosis Procedure 1.CHECK FRONT PO ...

Other materials:

Removal and installation
Bcm (body control module) Removal and Installation Note: Before replacing bcm, perform вЂњread configurationвЂќ to save or print current vehicle specification. Refer to bcs-116, "configuration (bcm) : description". Removal Disconnect the negative battery terminal. Refer to ...

Air conditioner operation (if so equipped)
Start the engine, turn the fan control dial to the desired position, and press the button to activate the air conditioner. When the air conditioner is on, cooling and dehumidifying functions are added to the heater operation. The air conditioner cooling function operates only whe ...

P014C, P014D, P015A, P015B A/F Sensor 1
DTC Logic DTC DETECTION LOGIC To judge the malfunction of A/F sensor 1, this diagnosis measures response time of the A/F signal computed by ECM from the A/F sensor 1 signal. The time is compensated by engine operating (speed and load), fuel feedback control constant, and the A/F sensor 1 tem ...