Nissan Sentra manuals

Nissan Sentra Service Manual: Diagnosis system (bcm) (without intelligent key system)

Nissan Sentra Service Manual / Driver information & multimedia / Warning chime system / System description / Diagnosis system (bcm) (without intelligent key system)

Common item

Common item : consult function (bcm - common item)

APPLICATION ITEM

CONSULT performs the following functions via CAN communication with BCM.

Direct Diagnostic Mode Description
ECU identification The BCM part number is displayed.
Self Diagnostic Result The BCM self diagnostic results are displayed.
Data Monitor The BCM input/output data is displayed in real time.
Active Test The BCM activates outputs to test components.
Work support The settings for BCM functions can be changed.
Configuration
  • The vehicle specification can be read and saved.
  • The vehicle specification can be written when replacing BCM.
CAN DIAG SUPPORT MNTR The result of transmit/receive diagnosis of CAN communication is displayed.

SYSTEM APPLICATION

BCM can perform the following functions.

Buzzer


Buzzer

BUZZER : CONSULT Function (BCM - BUZZER)

DATA MONITOR

ACTIVE TEST


ACTIVE TEST

Ecu diagnosis information


Diagnosis system (bcm) (with intelligent key system)
Common item Common item : consult function (bcm - common item) APPLICATION ITEM CONSULT performs the following functions via CAN communication with BCM. Direct Diagnostic Mode Descripti ...

Ecu diagnosis information
Bcm, combination meter List of ecu reference ...

Other materials:

P0335 CKP Sensor (POS)
DTC Logic DTC DETECTION LOGIC NOTE: If DTC P0340 is displayed with DTC P0643, first perform the trouble diagnosis for DTC P0643. Refer to EC- 353, "DTC Logic". DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition Possible cause ...

Hoses
HOSE REMOVAL AND INSTALLATION To prevent damage to rubber hose, do not pry off rubber hose with tapered tool or screwdriver.         To reinstall the rubber hose securely, make sure that hose insertion length and orientation is correct. (If tube is equipped with hose ...

M&A branch line circuit
Diagnosis procedure 1.Check connector Turn the ignition switch off. Disconnect the battery cable from the negative terminal. Check the terminals and connectors of the combination meter for damage, bend and loose connection (unit side and connector side). Is the inspection result nor ...

В© 2014-2019 Copyright www.nisentra.com