Diagnosis Procedure
CHECK REAR POWER WINDOW SWITCH LH POWER SUPPLY AND GROUND CIRCUIT
Check rear power window switch LH power supply and ground circuit.
Refer to Diagnosis Procedure.
Is the inspection result normal?
YES >>GO TO 2.
NO >>Repair or replace the malfunctioning parts.
CHECK REAR POWER WINDOW SWITCH LH
Check rear power window switch LH.
Refer to Diagnosis Procedure.
Is the inspection result normal?
YES >>GO TO 3.
NO >>Repair or replace the malfunctioning parts.
REPLACE MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH
Replace main power window and door lock/unlock switch. Refer to Removal and Installation.
Confirm the operation after replacement.
Is the result normal?
YES >>Inspection End.
NO >>Check intermittent incident. Refer to Intermittent Incident.
When Both Main Power Window and Door Lock/unlock Switch and Rear Power Window Switch Lh Are Operated
When Main Power Window and Door Lock/unlock Switch Is OperatedDtc Diagnosis Procedure
DTC Diagnosis
Procedure
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional information.
Activate and display TPMS sensor IDs
Display tire pressure reported ...
Preparation
Special Service Tool
Special Service Tool
The actual shape of the tools may differ from those
illustrated here.
Tool number
(TechMate No.)
Tool name
Descriptio ...
Wiring diagram
Ipdm e/r (intelligent power distribution module engine room)
Wiring diagram
...