Nissan Sentra Owners Manual: Trunk lid release switch

Nissan Sentra Owners Manual / Pre-driving checks and adjustments / Trunk lid / Trunk lid release switch

WARNING

Do not drive with the trunk lid open. This could allow dangerous exhaust gases to be drawn into the vehicle. See “Exhaust gas” in the “Starting and driving” section of this manual.
Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they could be seriously injured.

Keep the car locked, with the rear seatback and trunk lid securely latched when not in use, and prevent children’s access to car keys.

To open the trunk lid, push the opener switch down.

To close the trunk lid, lower and push the trunk lid down securely.

NOTE:

You can open the trunk lid with the Intelligent Key. Refer to “NISSAN Intelligent Key®” in this section.

Interior trunk lid release

WARNINGClosely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they could be seriously injured. Keep the car loc ...

Other materials:

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as вЂњAIR BAGвЂќ and вЂњSEAT BELT PRE-TENSIONERвЂќ, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collision. Information necessary to service the system ...

A/c auto amp. Connection recognition signal circuit
Description A/c auto amp. Transmits the a/c auto amp. Connection recognition signal to the combination meter Diagnosis procedure (with manual a/c) Regarding wiring diagram information, refer to mwi-28, "wiring diagram". 1.Check a/c auto amp. Connection recognition signal Turn ig ...

Dtc/circuit diagnosis
U1000 can comm circuit Description Refer to LAN-7, "CAN COMMUNICATION SYSTEM : System Description". Dtc logic DTC DETECTION LOGIC CONSULT Display DTC Detection Condition Possible Cause CAN COMM CIRCUIT [U1000] When IPDM E/R cannot communicate with CAN com ...