Toyota Camry Owner's Manual (2023): The keys
The following keys are provided with the vehicle.
Vehicles without a smart key system
- Keys
Operating the wireless remote control function - Key number plate
Vehicles with a smart key system
- Electronic keys
- Operating the smart key system
- Operating the wireless remote control function
- Mechanical keys
- Key number plate
Wireless remote control
Vehicles without a smart key system
- Locks all the doors
- Unlocks all the doors
Pressing the button unlocks the driver's door. Pressing the button again within 3 seconds unlocks the other doors. - Opens the windows*1 and the moon roof*1, 2
- Opens the trunk
- Sounds the alarm
*1: This setting must be customized at your Toyota dealer.
*2: If equipped
Vehicles with a smart key system
- Locks all the doors
- Unlocks all the doors
Pressing the button unlocks the driver's door. Pressing the button again within 3 seconds unlocks the other doors. - Opens the windows*1 and the moon roof*1, 2 or panoramic moon roof*1, 2
- Opens the trunk
- Sounds the alarm
*1: This setting must be customized at your Toyota dealer.
*2: If equipped
Key information
...
Using the key
Using the key (vehicles without a smart key system)
Releasing
To release the key, press the button.
Folding
To stow the key, press the button
then fold the key.
Using the mechanical k ...
Other materials:
Glove box assembly
Removal and Installation
REMOVAL
Remove the instrument side finisher RH using a suitable tool.
Remove the glove box assembly upper screws (A).
Remove the glove box assembly lower screws (A).
Disconnect the harness connectors from the trunk switch and glove box
lamp, the ...
Changing a flat tire
If you have a flat tire, follow the instructions below:
Stopping the vehicle
Safely move the vehicle off the road and
away from traffic.
Turn on the hazard warning flashers.
Park on a level surface and apply the parking
brake. Shift the manual transmission into R
(Reverse), or the CVT ...
Interior room lamp control circuit
Description
Controls each interior room lamp (ground side) by pwm signal.
Note:
Pwm signal control period is approximately 250 hz (in the gradual
brightening/dimming).
Component function check
Caution:
Before performing the diagnosis, check that the following are normal.
Interior room l ...
