Description
The illumination control switches are inoperative when pressed.
Diagnosis Procedure
CHECK ILLUMINATION CONTROL SWITCH SIGNAL CIRCUIT
Check the illumination control switch signal circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES >>GO TO 2.
NO >>Repair or replace harness or connector.
CHECK ILLUMINATION CONTROL SWITCH
Check the illumination control switch. Refer to Component Inspection.
Is the inspection result normal?
YES >>Replace combination meter. Refer to Removal and Installation.
NO >>Replace illumination control switch. Refer to Removal and Installation.
The Steering Switches Are Inoperative
The Oil Pressure Warning Lamp Does Not Turn onB2e1b Automatic Ecall
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
...
Precautions
Precaution for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner"
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as
“AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along wit ...
Main line between ipdm-e and dlc circuit
Diagnosis procedure
1.Check connector
Turn the ignition switch OFF.
Disconnect the battery cable from the negative terminal.
Check the following terminals and connectors for damage, bend and loose
connection (connector side
and harness side).
Harness connector E4
Harness connec ...