Nissan Sentra manuals

Nissan Sentra B18 (2020-2025) Service Manual: The Ambient Temperature Display Is Incorrect

Description

Description

Diagnosis Procedure

Diagnosis Procedure
  1. CHECK AMBIENT SENSOR SIGNAL CIRCUIT

    1. Check the ambient sensor signal circuit. Refer to Diagnosis Procedure.

    Is the inspection result normal?

    YES>>

    GO TO 2.

    NO>>

    Repair or replace harness or connector.

  2. CHECK AMBIENT SENSOR

    1. Check the ambient sensor. Refer to Component Inspection.

    Is the inspection result normal?

    YES>>

    Replace combination meter. Refer to Removal and Installation.

    NO>>

    Replace ambient sensor. Refer to Removal and Installation.

The Parking Brake Release Warning Continues Displaying, or Does Not Display
Description Description The parking brake warning is displayed during vehicle travel, even though the parking brake is released. The parking brake warning is n ...

The Low Washer Fluid Warning Lamp Does Not Turn on or Off
Description Description The low washer fluid warning lamp is still illuminated even after washer fluid is added. The low washer fluid warning lamp is not ...

Other materials:

Dtc Description
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis name) DTC detection condition ...

Diagnosis system (AIR BAG)
Description CAUTION: Never use electrical test equipment on any circuit related to the SRS unless instructed in this Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness connectors. Never repair, splice or modify the SRS wiring harness. ...

Excessive abs function operation frequency
Diagnosis Procedure 1.CHECK START Check front and rear brake force distribution using a brake tester. Is the inspection result normal? YES >> GO TO 2 NO >> Check brake system. 2.CHECK FRONT AND REAR AXLE Make sure that there is no excessive play in the front and rear axles. ...

В© 2014-2026 Copyright www.nisentra.com