Nissan Sentra B18 (2020-2025) Service Manual: Steering System :: Preparation. Preparation
Preparation
Special Service Tools
|
Tool number (TechMate No.) Tool name |
Description |
|
|---|---|---|
|
ST3127S000 (See NI-25765-A) Preload gauge 1. GG9103000 (NI-25765-A) Torque wrench 2. HT62940000 ( — ) Socket adapter 3. HT62900000 ( — ) Socket adapter |
 |
Inspection of rotating torque for ball joint |
|
KV40107300 (NI-51751) Boot band crimping tool |
 |
Installing boot band |
|
 —  (NI-44372) Spring gauge |
 |
Measure steering wheel turning force or rack sliding force |
|
HT72520000 (NI-25730-A) Ball joint remover |
 |
Removing ball joint |
Commercial Service Tools
|
Tool name |
Description |
|
|---|---|---|
|
Steering wheel puller |
 |
Removing steering wheel |
|
Power tool |
 |
Loosening nuts, screws and bolts |
|
Offset boot clamp pliers |
 |
Installing boot clamps |
Other materials:
OIL
Description
MAINTENANCE OF OIL LEVEL
The compressor oil is circulating in the system together with the
refrigerant. It is necessary to fill compressor
with oil when replacing A/C system parts or when a large amount of refrigerant
leakage is detected. It is important
to always maintain oil l ...
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat belt, helps to reduce the risk or severity of injury to the
driver and front passenger for certain
types of collision. Information necessary to service the system ...
The door open warning continues displaying, or does not display
Description
The door ajar warning is displayed even though all of the doors are
closed.
The door ajar warning is not displayed even though a door is ajar.
Diagnosis procedure
1.Check bcm input signal
Check the bcm input signal. Refer to dlk-102, "component function check"
( ...