Exploded View
|
1. |
Steering wheel |
2. |
Steering wheel finisher |
3. |
Steering switches |
Removal and Installation
REMOVAL
Note:
The steering switches are serviced as an assembly.
Remove driver air bag. Refer to Removal and Installation.
Using a
suitable tool, release pawls on the steering wheel front finisher
(1) using suitable tool and remove from the steering wheel.
|
|
: Pawl |
Using a
suitable tool, release pawls on the steering switches (1) using
suitable tool and remove from the steering wheel.
|
|
: Pawl |
Disconnect steering switch connector from spiral cable and remove from Nissan Sentra vehicle.
INSTALLATION
Installation is in the reverse order of removal.
Av Control Unit
MicrophonePrecaution
Precaution for supplemental restraint system (srs) "air bag" and "seat belt
pre-tensioner"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat belt, helps to reduce the risk or severity of injur ...
A-bag branch line circuit
Diagnosis procedure
Warning:
Always observe the following items for preventing accidental
activation.
Before servicing, turn ignition switch off, disconnect battery
negative terminal, and wait 3 minutes
or more. (To discharge backup capacitor.)
Never use unspecified tester or other me ...
The Oil Pressure Warning Lamp Does Not Turn Off
Description
Description
The oil pressure warning lamp remains illuminated
while the engine is running (normal oil pressure).
Diagnosis Procedure
Diagnosis Procedure
CHECK COMBINATION METER INPUT SIGNAL
CONSULT
...