Nissan Sentra B18 (2020-2025) Service Manual: Service Data and Specifications (sds)
General Specification
|
Applied model |
Engine |
MR20DD |
|
Axle |
FWD |
|
|
Transaxle model |
RE0F15A |
|
|
Transaxle gear ratio |
D position |
2.805 - 0.357 |
|
R position |
1.960 |
|
|
Final drive |
5.034 |
|
|
Recommended fluid and fluid capacity |
Fluids and Lubricants |
|
Shift Characteristics
|
Throttle position |
Shift pattern |
CVT input speed |
|
|---|---|---|---|
|
At 40 km/h (25 MPH) |
At 60 km/h (37 MPH) |
||
|
2/8 |
“D” position |
1,350 - 2,150 |
1,510 - 2,310 |
|
“L” position |
1,350 - 2,150 |
1,510 - 2,310 |
|
|
8/8 |
“D” position |
2,540 - 4,540 |
2,860 - 5,260 |
|
“L” position |
2,500 - 3,300 |
3,200 - 4,000 |
|
Lock-up is engaged at the Nissan Sentra vehicle speed of approximately 14 km/h (9 MPH) to 40 km/h (25 MPH).
Stall Speed
|
Stall speed |
2,030 - 2,370 |
Torque Converter
|
Dimension “A” between the converter housing and torque converter |
14.4 (0.567) |
Thickness Value of Thrust Bearing Race
|
Total end play |
Thickness value of thrust bearing race |
|---|---|
|
1.29 - 1.50 |
1.00 |
|
1.51 - 1.70 |
1.20 |
|
1.71 - 1.90 |
1.40 |
|
1.91 - 2.10 |
1.60 |
|
2.11 - 2.30 |
1.80 |
|
2.31 - 2.50 |
2.00 |
Other materials:
C1060-97 Wheel Sensor
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen item
(Trouble diagnosis
content)
DTC detection condition ...
Head restraints/headrests
WARNING
Head restraints/headrests in the Nissan Sentra are designed to supplement
other vehicle safety systems. When properly adjusted, they may provide additional
protection against neck and head injuries in certain rear-end collisions.
Adjustable head restraints/headrests must always be set ...
Work Procedure
Work Procedure
CHECK ANTI-PINCH FUNCTION
Fully open the door window.
Place a piece of wood near fully closed position.
Close door glass completely with ...
