Nissan Sentra B18 (2020-2025) Service Manual: Service Data and Specifications (sds)
Periodical Maintenance Specification
ENGINE COOLANT CAPACITY (APPROXIMATE)
Unit:
(US qt, Imp qt) |
Engine coolant capacity (With reservoir tank at “MAX” level) |
M/T models |
6.9 (7-1/4, 6-1/8) |
|
CVT models |
7.1 (7-1/2, 6-1/4) |
|
|
Reservoir tank engine coolant capacity (At “MAX” level) |
0.8 (7/8, 3/4) |
|
Radiator
|
Cap relief pressure |
Standard |
130.0 - 150.0 (1.3 - 1.5, 18.9 - 21.8) |
|
Limit |
110 (1.1, 16.0) |
|
|
Leak testing pressure |
157 (1.6, 22.8) |
|
Thermostat
|
Valve opening temperature |
80.5 - 83.5 °C (177 - 182 °F) |
|
Full-open lift amount |
More than 8 mm / 95 °C (0.31 in / 203 °F) |
|
Valve closing temperature |
77 °C (171 °F) or higher |
Water Control Valve
|
Valve opening temperature |
93.5 - 96.5 °C (200 - 206 °F) |
|
Full-open lift amount |
More than 8 mm / 108 °C (0.31 in / 226 °F) |
|
Valve closing temperature |
90 °C (194 °F) or higher |
Other materials:
Additional Service When Replacing Adas Control Unit 2
Description
Description
Always perform the ADAS control unit 2 configuration after
replacing the ADAS control unit 2.
Work Procedure
Work Procedure
ADAS CONTROL UNIT 2 CONFIGURATION
CONSULT
Perform the ADAS control unit 2 configuration.
Refer to Descri ...
Reverse Idler Shaft and Gear
Exploded View
Exploded View
1.
Reverse output gear
2.
Snap ring
3.
R ...
Additional service when removing battery negative terminal
Description
When the battery negative terminal is disconnected, the initialization is
necessary for normal operation of
power window system.
CAUTION:
The following specified operations can not be performed under the
non-initialized condition.
Auto-up operation
Anti-pinch function
Wo ...
