Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation
Removal
Remove the CVT/MT shift selector finisher. Refer to Exploded View.
Disconnect
the harness connector (A) from the front console power socket
(1).
Using a
suitable tool, release the front console power socket pawls from
the back of the console finisher assembly and remove. 
|
|
: Pawl |
Installation
Installation is in the reverse order of removal.
Note: 
Make sure to align the tab with the square notched area during installation.
Other materials:
Variable voltage control system
CAUTION
Do not ground accessories directly to
the battery terminal. Doing so will bypass
the variable voltage control system
and the vehicle battery may not
charge completely.
Use electrical accessories with the engine
running to avoid discharging the
vehicle battery.
Your v ...
Engine Assembly
Exploded View
Exploded View
CVT Models
1.
Engine mounting
insulator (LH)
2.
Engine mounting
insula ...
U2140-87 Can Comm Err (ecm)
Dtc Description
DTC Description
DESCRIPTION
CAN (Controller Area Network) is a serial communication
system for real time application. It is an on-Nissan Sentra vehicle multiplex communication
system with high data communication speed and excellent error detection
ability. Many ele ...
