REMOVAL
Open hood.
Disconnect
the harness connector from the Intelligent Key warning buzzer
(1).
|
|
:Pawl |
Release pawl and remove Intelligent Key warning buzzer in direction shown.
INSTALLATION
Installation is in the reverse order of removal.
Dtc Diagnosis Procedure
DTC Diagnosis Procedure
PERFORM SELF DIAGNOSIS RESULT
CONSULT
Ignition switch ON.
Erase "Self Diagnostic Result" mode of "EPS/DAST
3".
...
Precautions
Precaution for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner"
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as
“AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along wit ...
Diagnosis Procedure
Diagnosis Procedure
CHECK COMBINATION METER INPUT SIGNAL
CONSULT
Check the combination meter input signal. Refer
to Component Function Check.
Is the inspection result normal?
YES >>
GO TO 2.
...