Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation
REMOVAL
Remove the front wiper drive assembly. Refer to Removal and Installation.
Remove
steering member bolts (A) in engine room. 
Remove the instrument panel assembly. Refer to Removal and Installation.
Remove left knee air bag module. Refer to Removal and Installation.
Remove right knee air bag module. Refer to Removal and Installation.
Remove bolt
(A) and separate lower joint (2) from steering column (1). 
CAUTION:
Place a matching mark on both lower joint and steering column before separating.
Remove
bolts (A) and lower steering column to the floor. 
Remove heating and cooling unit assembly bolts. Refer to Exploded View.
Disconnect all necessary harness connectors.
Remove steering member bolts. Refer to Exploded View.
Remove steering member from Nissan Sentra vehicle.
CAUTION:
Two people are required for removal to prevent damage to steering member.
INSTALLATION
Installation is in the reverse order of removal.
Note:
If replacing steering member, transfer all of the necessary parts to the new steering member.
Exploded View
Exploded View
1.
Heating and cooling unit
assembly
...
Other materials:
Precaution for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner"
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as
“AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along with a front seat belt, helps to reduce the risk or
severity of injury to the driver and fron ...
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat belt, helps to reduce the risk or severity of inju ...
Exploded View
Exploded View
1.
Fuel filler lid
opener lever
2.
Fuel filler lid opener
cable
...
