Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation
CAUTION:
-
When removing, always use a suitable tool that is made of plastic to prevent damage to the parts.
-
Do not damage the door panel.
REMOVAL
Using a
suitable tool, release pawls and remove inside door handle
escutcheon (1).
:
Pawl
Remove bolt
(A).
Remove main power window and door lock/unlock switch. Refer to Removal and Installation.
Remove bolt
(A).
Using a
suitable tool, release clips of front door finisher. Refer to Exploded View.
Remove front door finisher as
shown.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
When installing, check that clips are accurately aligned with the holes on the door panel, then press in.
Exploded View
Exploded View
1.
Front door panel
2.
...
Other materials:
Exterior rear
This section presents the rear exterior features of the Nissan Sentra, focusing
on visibility, access, and safety assistance systems.
Rearview camera for easier parking and reversing
Trunk lid
Trunk lid release
High-mounted stop light for improved braking visibility
Replacing bulbs ...
U1300 Av Communication Circuit
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection condition
...
Precaution for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner"
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as
“AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along with a front seat belt, helps to reduce the risk or
severity of injury to the driver and fron ...
