Nissan Sentra B18 (2020-2025) Service Manual: Preparation. Preparation
Preparation
Special Service Tool
Special Service Tool
|
Tool number (TechMate No.) Tool name |
Description |
|
|---|---|---|
|
  — (NI-45741) ABS active wheel sensor tester |
 |
Checking operation of ABS active wheel sensor |
|
  — (NI-46534) Trim Tool Set |
 |
Removing trim components |
Commercial Service Tools
Commercial Service Tools
|
Tool name |
Description |
|
|
1. Flare nut crowfoot 2. Torque wrench |
 |
Tightening brake tube flare nuts a: 10 mm (0.39 in)/12 mm (0.47 in) |
|
Power tool |
 |
Loosening nuts, screws and bolts |
Other materials:
Operating range
The NISSAN Intelligent Key functions on the Nissan Sentra can only be used when
the Intelligent Key is located within the specified operating range of the request
switch (if so equipped) 1. This ensures secure and reliable communication between
the vehicle and the Intelligent Key system.
...
Tire Pressure Monitoring System (TPMS)
Each tire on the Nissan Sentra, including the spare tire if equipped, should
be inspected at least once a month when the tires are cold and inflated to the pressure
recommended by the vehicle manufacturer. This information is shown on the vehicle
placard or the tire inflation pressure label. I ...
Reference Value
Reference Value
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions. Refer to the Signal Tech II User
Guide for additional information.
Activate and display TPMS transmitter IDs
Display tire pressure reported by the ...