Nissan Sentra B18 (2020-2025) Service Manual: Preparation. Preparation
Preparation
Special Service Tools
|
Tool number (TechMate No.) Tool name |
Description |
|
|---|---|---|
|
  — (1-20-2851-1) Radar Sensor Aiming kit* |
![]() |
Adjusting ICC and radar sensors |
* NOTE: Tools 1–20–2721–1–IF, 1–20–2722–1–IF and NI-50808 have been superseded and are no longer available, but may still be used for Distance Sensor alignment.
Other materials:
Dlc branch line circuit
Diagnosis procedure
1.Check connector
Turn the ignition switch off.
Disconnect the battery cable from the negative terminal.
Check the terminals and connectors of the data link connector for
damage, bend and loose connection
(connector side and harness side).
Is the inspection resul ...
Ecu Diagnosis Information. Av Control Unit
Av Control Unit
Values on the Diagnosis Tool
Values on the Diagnosis Tool
Note:
The following table includes information (items)
inapplicable to this Nissan Sentra vehicle. For information (items) applicable to
this vehicle, refer to CONSULT display items.
...
Map lamp
Removal and installation
Removal
Lower front edge of map lamp (1) down from the headlining by
releasing the metal clips, then slide forward to clear pawls at
rear.
: Metal clip
Pawl
Disconnect the harness connectors from the map lamp and remove.
Installation
Installation is in t ...
