Nissan Sentra B18 (2020-2025) Service Manual: Precautions for Drive Shaft
Observe the following precautions when disassembling and assembling drive shaft.
-
Do not disassemble joint sub-assembly because it is non-overhaul parts.
-
Perform work in a location which is as dust-free as possible.
-
Clean the parts before disassembling and assembling.
-
Prevent the entry of foreign objects during disassembly of the service location.
-
Reassemble disassembled parts carefully in the correct order. If work is interrupted, a clean cover must be placed over parts.
-
Use paper shop cloths. Fabric shop cloths must not be used because of the danger of lint adhering to parts.
-
Clean disassembled parts (except for rubber parts) with kerosene which shall be removed by blowing with air or wiping with paper shop cloths.
Precaution for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner"
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as
“AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used alo ...
Other materials:
Oil filter
Removal and Installation
REMOVAL
Remove engine under cover. Refer to EXT-16, "Exploded View".
Drain engine oil. Refer to LU-8, "Draining".
Remove the oil filter using Tool (A) as shown.
: Front
Tool number : KV10115801 (J-38956)
WARNING:
Be careful not to burn you ...
Head restraints/headrests
WARNING
Head restraints/headrests in the Nissan Sentra are designed to supplement
other vehicle safety systems. When properly adjusted, they may provide additional
protection against neck and head injuries in certain rear-end collisions.
Adjustable head restraints/headrests must always be set ...
System Description
System Description
INPUT SIGNAL AND OUTPUT SIGNAL
Signal name
Input
Output
Description
Doo ...
