Nissan Sentra B18 (2020-2025) Service Manual: Precaution. Precautions
Precautions
Precautions for Trouble Diagnosis
Precautions for Trouble Diagnosis
CAUTION:
Follow the instructions listed below. Failure to do this may cause damage to parts:
-
Never apply 7.0 V or more to the measurement terminal.
-
Use a tester with open terminal voltage of 7.0 V or less.
-
Turn the ignition switch OFF and disconnect the battery cable from the negative terminal when checking the harness.
Precautions for Harness Repair
Precautions for Harness Repair
-
Solder the repaired area and wrap tape around the soldered area.
Note:
A fray of twisted lines must be within 110 mm (4.33 in).
-
Bypass connection is never allowed at the repaired area.
Note:
Bypass connection may cause CAN communication error. The spliced wire becomes separated and the characteristics of twisted line are lost.
-
Replace the applicable harness as an assembly if error is detected on the shield lines of CAN communication line.
Other materials:
Fuel Tank Temperature Sensor
Component Inspection
Component Inspection
CHECK FUEL TANK TEMPERATURE (FTT)
SENSOR
Turn ignition switch OFF.
Disconnect fuel level sensor unit and
fuel pump harness connector.
Remov ...
Manifold Absolute Pressure Sensor
Component Inspection
Component Inspection
CHECK MANIFOLD ABSOLUTE PRESSURE
(MAP) SENSOR-1
Turn ignition switch OFF.
Start engine and warm it up to normal
operating temperature.
Turn ...
Trip computer
1. Vehicle speed
The vehicle speed screen shows the current speed of the Nissan Sentra as well
as the average vehicle speed calculated since the last reset.
Average vehicle speed:
Press the OK button on the steering wheel to open the drive computer Reset menu,
then follow the on-screen in ...