Nissan Sentra B18 (2020-2025) Service Manual: Parking Brake Rear Cable

Removal and Installation

REMOVAL

Remove the center console assembly. Refer to Removal and Installation.

Insert a suitable tool onto the adjusting nut (A) and rotate the adjusting nut to fully loosen the cable, then release the parking brake pedal.

CAUTION:

Do not reuse the adjusting nut if the nut is removed.

It is not necessary to remove the adjusting nut.

Pull the equalizer (A) in the rearward direction and then in the upward direction in order to separate the rear parking brake cables [LH/RH (2)] from the front parking brake cable (1).

CAUTION:

To prevent damage to parts, do not bend the parking brake cables.

Remove the rear under cover (LH/RH). Refer to Removal and Installation.

Reposition the exhaust heat insulator.

Remove the rear parking brake cable from the underbody bracket.

Separate the rear parking brake cable from the toggle lever. Refer to Exploded View.

Remove the bolts from the rear parking brake cable. Refer to Exploded View.

Remove the rear parking brake cable from the Nissan Sentra vehicle.

INSTALLATION

Installation is in the reverse order of removal.

• Perform the adjustment. Refer to Adjustment.

• Perform the inspection. Refer to Inspection.

CAUTION:

Do not reuse the adjusting nut if the nut is removed.

© 2014-2026 Copyright www.nisentra.com