Nissan Sentra B18 (2020-2025) Service Manual: Parking Brake Front Cable
Removal and Installation
REMOVAL
Remove the center console assembly. Refer to Removal and Installation.
Remove the driver seat. Refer to Removal and Installation.
Remove the adjusting nut from the parking brake pedal assembly. Refer to Exploded View.
CAUTION:
Do not reuse the adjusting nut.
Position the floor trim aside.
Position the floor insulator aside.
Remove the nuts and the bolt from the front parking brake cable. Refer to Exploded View.
Pull the
equalizer (A) in the rearward direction and then in the upward
direction in order to separate the rear parking brake cables [LH/RH
(2)] from the front parking brake cable (1). 
CAUTION:
To prevent damage to parts, do not bend the parking brake cables.
Remove the front parking brake cable.
INSTALLATION
Installation is in the reverse order of removal.
-
Perform the adjustment. Refer to Adjustment.
-
Perform the inspection. Refer to Inspection.
CAUTION:
Do not reuse the adjusting nut.
Parking Brake Control
Exploded View
Exploded View
1.
Front parking brake
cable
...
Parking Brake Rear Cable
Removal and Installation
Removal and Installation
REMOVAL
Remove the
center console assembly. Refer to Removal and Installation.
Insert a
suitable tool onto the adjusting nut (A) a ...
Other materials:
B1360 Combination Meter
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection condition
...
Dtc Diagnosis Procedure
DTC Diagnosis
Procedure
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional information.
Activate and display TPMS sensor IDs
Display tire pressure reported ...
Standardized relay
Description
Normal open, normal closed and mixed type relays
Relays can mainly be divided into three types: normal open, normal closed and
mixed type relays.
Type of standardized relays
...
