Nissan Sentra B18 (2020-2025) Service Manual: Inspection
Perform the following:
Make sure that generator pulley does not rattle.
Make sure
that generator pulley nut is tight.
Note: 
Replace generator as an assembly if necessary.
Removal and Installation
Removal and Installation
REMOVAL
Disconnect
the battery negative terminal. Refer to Battery Disconnect.
Remove
intake manifold. Refer to Removal and Installation.
Partially
re ...
Other materials:
Precaution for Work
When removing or disassembling each component, be careful not to damage
or deform it. If a component
may be subject to interference, be sure to protect it with a shop cloth.
When removing (disengaging) components with a screwdriver or similar
tool, be sure to wrap the component
with a ...
Rear door
Door assembly
Door assembly : removal and installation
Caution:
Use two people when removing or installing the rear door assembly
due to its heavy weight.
When removing and installing rear door assembly, support rear door
with a suitable tool.
Removal
Remove rear door assembly h ...
Dtc Confirmation Procedure
DTC Confirmation
Procedure
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON.
Turn heated seat switch LH (LOW) ON.
Select “S ...
