INSPECTION
Appearance
Check the surface of the brake drum for uneven wear, cracks, or damage. Replace the brake drum if any abnormal conditions exist. Refer to Removal and Installation.
Brake Drum Inner Diameter
Check the maximum inner diameter (B) of the brake drum. Replace the brake drum if the maximum inner diameter is greater than the limit. Refer to Removal and Installation.
|
Maximum inner diameter (B) |
: Refer to Rear Drum Brake. |
Brake Drum
Rear Brake PadDoor Motor Circuit
Diagnosis Procedure
Diagnosis Procedure
Note:
If all of door motor DTCs are detected, check this
circuit.
CHECK DOOR MOTOR POWER SUPPLY
Ignition switch ON.
Check voltage between in ...
Basic inspection
Diagnosis and repair work flow
Work flow
Overall sequence
Detailed flow
1.Get information for symptom
Get detailed information from the customer about the symptom (the
condition and the environment when
the incident/malfunction occurs).
Check operation condition of the component o ...
Radio
With the ignition placed in the ACC or ON position,
press the PWR (power)/VOL (volume) knob
to turn the radio on. If you listen to the radio with
the engine not running, the ignition should be
placed in the ACC position.
Radio reception is affected by station signal
strength, distance from r ...