Nissan Sentra B18 (2020-2025) Service Manual: Inspection
INSPECTION AFTER INSTALLATION
Check that the accelerator pedal moves smoothly within the specified range.
:
Front
|
Accelerator pedal stroke (A) |
: Refer to Accelerator Control. |
For the electrical inspection of accelerator pedal position sensor. Refer to Work Procedure.
CAUTION:
-
Perform the “ACCELERATOR PEDAL RELEASED POSITION LEARNING”. Refer to Work Procedure.
-
The accelerator pedal should return smoothly to the fully raised position.
Removal and Installation
Removal and Installation
REMOVAL
Disconnect
the harness connector from the accelerator pedal
assembly.
Remove
bolts and remove accelerator pedal assembly.
CAUTION:
...
Other materials:
Brake fluid
Drain and Refill
CAUTION:
Do not spill or splash brake fluid on painted surfaces. Brake
fluid may damage paint. If brake fluid is
splashed on painted areas, wash it away with water immediately.
Prior to repair, turn the ignition switch OFF, disconnect the ABS
actuator and electric uni ...
Removal and Installation - Seat Cushion Assembly
Removal and Installation - Seat Cushion Assembly
REMOVAL
Lift up the
seat cushion assembly close to the front edge (B) to release it
from the seat cushion hooks (A) (one for each side).
Remove the
rear seatback assembly. Refer to Removal and Installation - 60:40 Split
Seatba ...
Work Flow
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
GET INFORMATION FOR SYMPTOM
Get detailed information from the customer about
the symptom (the condition and the environment when the incident/malfunction
...
