Nissan Sentra B18 (2020-2025) Service Manual: Id Registration Procedure

Work Flow

Work Flow OVERALL SEQUENCE Note: The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional informat ...

Description

Description This procedure must be performed after replacement of a tire pressure sensor or BCM. ...

Other materials:

Removal and Installation
Removal and Installation REMOVAL Remove the wheel and tire using power tool. Refer to Removal and Installation. Remove the valve cap and the valve core to deflate the tire. Refer to Exploded View. Note: If the tire is to be reused, apply a matching mark on the tire in line ...

System description
COMPONENT PARTS Component Part Location ECM IPDM E/R BCM (view with combination meter removed) A/C auto amp. (view with A/C switch assembly removed) A/C switch assembly A/C Compressor Refrigerant pressure sensor (view with front bumper fascia removed) Fuse Block (J/ ...

Fuel Injector Relay
Component Inspection Component Inspection CHECK FUEL INJECTOR RELAY Turn ignition switch OFF. Remove fuel injector relays. Refer to Component Parts Location. Check the continuit ...