Nissan Sentra B18 (2020-2025) Service Manual: How to Handle Battery
CAUTION:
-
If it becomes necessary to start the engine with a booster battery and jumper cables, use a 12-volt booster battery.
-
After connecting battery cables, ensure that they are tightly clamped to battery terminals for good contact.
-
Never add distilled water through the battery gas vents.
-
Never remove the battery vent barrel.
METHODS OF PREVENTING OVER-DISCHARGE
The following precautions must be taken to prevent over-discharging a battery.
-
The battery surface (particularly its top) should always be kept clean and dry.
-
The terminal connections should be clean and tight.
-
When the Nissan Sentra vehicle is not going to be used over a long period of time, disconnect the battery cable from the negative terminal. (If the Nissan Sentra vehicle has an extended storage fuse switch, turn it off.)
Battery
...
Work Flow
Work Flow
BATTERY DIAGNOSIS WITH 165-DSS-5000P
To diagnose and confirm the condition of the battery,
use the 165-DSS-5000P.
Note:
Refer to the Instruction Manual for proper battery
di ...
Other materials:
B2c20-12 Starter Cut Relay
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen items
(Trouble diagnosis
content)
DTC detecting condition
...
B20de-72 Ign Relay Off Circ
Dtc Description
DTC Description
The IPDM E/R operates the ignition relay-1 when
it receives an ignition switch ON signal from the BCM via CAN communication.
Turn the ignition relay-1 OFF by pressing the push-button
ignition switch once when the Nissan ...
Removal and installation
ACCELERATOR CONTROL SYSTEM
Exploded View
Accelerator pedal assembly
Brake pedal bracket
Locating hook
Locating pin
Removal and Installation
REMOVAL
Remove instrument lower panel LH. Refer to IP-21, "Removal and
Installation".
Disconnect the harness connector ...
