Component Inspection

Component Inspection

1. CHECK HIGH PRESSURE FUEL PUMP RELAY

   1. Turn ignition switch OFF.

   2. Remove high pressure fuel pump relay. Refer to Component Parts Location.

   3. Check the continuity between high pressure fuel pump relay terminals.

      

      High pressure fuel pump relay		Condition	Continuity
      +	−
      Terminal
      1	2	12 V direct current supply between terminals 3 and 4	Existed
      		No current supply	Not existed

   Is the inspection result normal?

   YES >>

   INSPECTION END

   NO >>

   Replace high pressure fuel pump relay. Refer to Component Parts Location.