Nissan Sentra B18 (2020-2025) Service Manual: Heater Core
Hot coolant from the engine is passed through a winding tube of the core. Fins attached to the core tubes serve to increase surface for heat transfer to air that is forced past them, by a fan, thereby heating the passenger compartment.
Heating and Cooling Unit Assembly
Heating and Cooling Unit Assembly
This unit combines the blower unit, heating unit,
and cooling unit into an assembly.
...
Expansion Valve
Expansion Valve
The refrigerant temperature is detected by the
temperature sensing part located in low-pressure refrigerant path
inside expansion valve. The lift amount of high-pressure side ...
Other materials:
Dtc Description
DTC Description
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional information.
Activate and display TPMS sensor IDs
Display tire pressure reported by the TPMS ...
FM/AM/SAT radio with compact disc (CD) player (Type B) (if so equipped)
For all operation precautions, see “Audio operation
precautions” in this section.
Audio main operation
ON-OFF button / VOL (volume) control
knob:
Place the ignition switch in the ACC or ON
position and press the ON-OFF button while the
system is off to call up the mode (radio, CD, AUX,
B ...
Water Outlet and Water Control Valve
Exploded View
Exploded View
1.
Water hose
2.
Clamp
3.
Water control ...
