The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information.
Activate and display TPMS sensor IDs
Display tire pressure reported by the TPMS sensor
Read TPMS DTCs
Register TPMS sensor IDs
DTC DETECTION LOGIC
|
DTC No. |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|
|---|---|---|---|
|
C1713-7A |
Low tire pressure RL (Low tire pressure Rear left) |
Diagnosis condition |
Drive at a speed of 25 MPH (40 km/h)or more reaches 10 minutes in total. |
|
Signal (terminal) |
Tire pressure sensor signal. |
||
|
Threshold |
Rear left tire air pressure is 10 psi (70 kPa, 0.7 kg/cm2) or less. |
||
|
Diagnosis delay time |
10 minutes or more. |
||
POSSIBLE CAUSE
Rear left tire air pressure is low
Rear left tire puncture
FAIL-SAFE
—
Dtc Confirmation ProcedureService Notice and Precautions for Road Wheel
Genuine NISSAN aluminum wheel is designed for each type of vehicle. Use
it on the specified vehicle only.
Use Genuine NISSAN parts for the road wheels, valve caps and wheel nuts.
Always use them after adjusting the wheel balance. For the balance
weights, use Genuine NISSAN aluminum
wh ...
Text messaging
WARNING
Laws in some jurisdictions may restrict
the use of some of the applications and
features, such as social networking and
texting. Check local regulations for any
requirements.
Laws in some jurisdictions may restrict
the use of “Text-to-Speech”. Check loc ...
Confirmation Procedure
Confirmation Procedure
PERFORM DTC CONFIRMATION
PROCEDURE
CONSULT
Select “Self Diagnosis Result” mode
of “HANDS FREE MODULE”.
Is DTC detected?
YES>>
Refer to DTC Diagnosis Procedure. ...