Nissan Sentra B18 (2020-2025) Service Manual: Harness Layout
OUTLINE
Refer to Harness Layout.
BODY HARNESS - LH VIEW
Refer to Harness Layout.
BODY HARNESS - LOWER REAR VIEW
Refer to Harness Layout.
BODY HARNESS - REAR VIEW
Refer to Harness Layout.
BODY HARNESS - RH VIEW
Refer to Harness Layout.
FRONT SEAT LH HARNESS
Refer to Harness Layout.
FRONT DOOR LH HARNESS
Refer to Harness Layout.
FRONT DOOR RH HARNESS
Refer to Harness Layout.
REAR DOOR LH HARNESS
Refer to Harness Layout.
REAR DOOR RH HARNESS
Refer to Harness Layout.
ENGINE ROOM HARNESS - BATTERY VIEW
Refer to Harness Layout.
ENGINE ROOM HARNESS - CABIN VIEW
Refer to Harness Layout.
ENGINE ROOM HARNESS - LH VIEW
Refer to Harness Layout.
ENGINE ROOM HARNESS - RH VIEW
Refer to Harness Layout.
BATTERY CABLE
Refer to Harness Layout.
ENGINE CONTROL HARNESS - BATTERY VIEW
Refer to Harness Layout.
ENGINE CONTROL HARNESS - FRONT VIEW
Refer to Harness Layout.
ENGINE CONTROL HARNESS - TOP VIEW
Refer to Harness Layout.
ENGINE CONTROL HARNESS - TRANS VIEW (WITH CVT)
Refer to Harness Layout.
ENGINE CONTROL HARNESS - TRANS VIEW (WITH MT)
Refer to Harness Layout.
HVAC SUB-HARNESS VIEW
Refer to Harness Layout.
MAIN HARNESS - CONSOLE VIEW
Refer to Harness Layout.
MAIN HARNESS - INSTRUMENT PANEL LH VIEW
Refer to Harness Layout.
MAIN HARNESS - INSTRUMENT PANEL RH VIEW
Refer to Harness Layout.
MAIN HARNESS - RADIO VIEW
Refer to Harness Layout.
ROOM LAMP HARNESS
Refer to Harness Layout.
Harness
...
Other materials:
Removal and Installation
Removal and Installation
Remove
cluster lid A. Refer to Removal and Installation.
Using a
suitable tool, release pawls and remove instrument side finishers
[1 (LH/RH)]. Note:
LH shown; RH similar
:
Pawl
Remove
instrument lower panel LH. Refer to Removal and Ins ...
P0138 HO2S2
DTC Logic
DTC DETECTION LOGIC
The heated oxygen sensor 2 has a much longer switching time between rich and
lean than the air fuel ratio (A/
F) sensor 1. The oxygen storage capacity of the three way catalyst (manifold)
causes the longer switching
time.
MALFUNCTION A
To judge the malfunction ...
Steering angle sensor
Exploded View
Steering angle sensor
Screw
Front
Removal and Installation
REMOVAL
Remove spiral cable assembly. Refer to SR-16, "Removal and
Installation".
Remove the two screws and the steering angle sensor from
spiral cable.
INSTALLATION
Ins ...
