Nissan Sentra B18 (2020-2025) Service Manual: Handling for Adhesive and Primer
-
Do not use an adhesive which is past its usable date. Shelf life of this product is limited to six months after the date of manufacture. Carefully adhere to the expiration or manufacture date printed on the box.
-
Keep primers and adhesive in a cool, dry place. Ideally, they should be stored in a refrigerator.
-
Open the seal of the primer and adhesive just before application. Discard the remainder.
-
Before application, be sure to shake the primer container to stir the contents. If any floating material is found, do not use it.
-
If any primer or adhesive contacts the skin, wipe it off with gasoline or equivalent and wash the skin with soap.
-
When using primer and adhesive, always observe the precautions in the instruction manual.
Procedure Without Cowl Top Cover
Procedure without Cowl Top Cover
When performing the procedure after removing cowl
top cover, cover the lower end of windshield with urethane,
etc.
...
Precautions for Work
Precautions for Work
When removing or disassembling each component, be
careful not to damage or deform it. If a component may be subject
to interference, be sure to prote ...
Other materials:
Unit disassembly and assembly
Center console assembly
Exploded View
Center console upper finisher
Center console side finisher (RH)
Center console side finisher (LH)
Center console side finisher screw cover
(LH/RH)
Center console assembly
Center console screw cover (LH/RH)
Center console rear finisher
C ...
Removal and Installation
Removal and Installation
REMOVAL
Remove the
main power window and door lock/unlock switch. Refer to Removal and Installation.
Using a
suitable tool, release pawls and remove the door mirror remote
control switch (1).
:
Pawl
INSTALLATION
Installation is in the rever ...
Fuel Level Sensor Unit
Exploded View
Exploded View
1.
Fuel filter and fuel pump
assembly
2.
Fuel level sensor unit
&nb ...
