Removal and Installation
REMOVAL
Remove fuel filler lid opener lever bolts.
Disconnect
fuel filler lid opener cable (1) from fuel filler lid opener lever
(2) as shown.
Remove dash side finisher (LH). Refer to Removal and Installation.
Remove center pillar lower finisher (LH). Refer to Removal and Installation.
Remove seat cushion assembly. Refer to Removal and Installation .
Remove trunk side finisher (LH). Refer to Removal and Installation.
Remove the fuel filler lid opener cable from fuel filler lid lock assembly. Refer to Removal and Installation.
Release
each harness protector (1), and then remove fuel filler lid opener
cable (2).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
After installation, check fuel filler lid assembly open/close, lock/unlock operation.
Fuel Filler Base
Fuel Filler Lid LockSelect Solenoid Valve Circuit
Diagnosis Procedure
Diagnosis Procedure
CHECK HARNESS CONNECTOR
Ignition switch OFF.
Check the mating condition of TCM
harness connector and CVT unit harness
connector.
Is the inspect ...
Exploded View
Exploded View
1.
Door mirror assembly
2.
Door mirror base cover
3.
Side ...
Dtc Inspection Priority Chart
DTC Inspection Priority Chart
When multiple DTCs are detected simultaneously,
check one by one depending on the following priority list:
Priority
Detected item (DTC)
...