Nissan Sentra manuals

Nissan Sentra B18 (2020-2025) Service Manual: Front Lh

Diagnosis Procedure

Diagnosis Procedure
  1. CHECK FRONT POWER WINDOW MOTOR LH INPUT SIGNAL

      1. Ignition switch OFF.

      2. Disconnect front power window motor LH connector.

      3. Ignition switch ON.

      4. Check voltage between front power window motor LH harness connector and ground.

      (+)

      (-)

      Condition

      Voltage

      (Approx.)

      Front power window motor LH

      Connector

      Terminal

      D8

      2

      Ground

      Main power window and door lock/unlock switch

      NEUTRAL

      0 V

      UP

      Battery voltage

      1

      NEUTRAL

      0 V

      DOWN

      Battery voltage

    Is the inspection result normal?

    YES>>

    Replace front power window motor LH. Refer to Removal and Installation.

    NO>>

    GO TO 2.

  2. CHECK FRONT POWER WINDOW MOTOR LH CIRCUIT

      1. Ignition switch OFF.

      2. Disconnect main power window and door lock/unlock switch connector.

      3. Check continuity between main power window and door lock/unlock switch harness connector and front power window motor LH harness connector.

        Main power window and door lock/unlock switch

        Front power window motor LH

        Continuity

        Connector

        Terminal

        Connector

        Terminal

        D5

        3

        D8

        1

        Yes

        10

        2

      4. Check continuity between main power window and door lock/unlock switch harness connector and ground.

        Main power window and door lock/unlock switch

        Continuity

        Connector

        Terminal

        D5

        3

        Ground

        No

        10

    Is the inspection result normal?

    YES>>

    Check intermittent incident. Refer to Intermittent Incident.

    NO>>

    Repair or replace harness.

Power Window Motor
...

Front Rh
Diagnosis Procedure Diagnosis Procedure CHECK FRONT POWER WINDOW MOTOR RH INPUT SIGNAL Ignition switch OFF. ...

Other materials:

Dtc Diagnosis Procedure
DTC Diagnosis Procedure Note: The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information. Activate and display TPMS sensor IDs Display tire pressure reported ...

Precautions for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner"
Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and fro ...

License Plate Lamp
Component Inspection Component Inspection CHECK LICENSE PLATE LAMP 1 Ignition switch OFF. Disconnect license plate lamp connector. Check continuity b ...

© 2014-2026 Copyright www.nisentra.com