Nissan Sentra B18 (2020-2025) Service Manual / Transmission & Driveline / Front Axle :: Service Data and Specifications (sds). Service Data and Specifications (sds)

Nissan Sentra B18 (2020-2025) Service Manual: Front Axle :: Service Data and Specifications (sds). Service Data and Specifications (sds)

Service Data and Specifications (sds). Wheel Bearing

Wheel Bearing

Item	Standard
Axial end play	0.05 mm (0.002 in) or less

Drive Shaft

Drive Shaft Specifications


Application	M/T
Joint type	Wheel side		Transaxle side
	(LH)	(RH)	(LH)	(RH)
Grease amount*	105 - 125 g (3.70 - 4.41 oz)		130 - 140 g (5.49 - 4.94 oz)
Molykote M77 lubricant*	1.0 - 3.0 g (0.04 - 0.11 oz)
Boot installed length (L)	94.80 mm (3.732 in)		87.10 mm (3.429 in)

*: Always check with the Parts Department for the latest parts information.

Drive Shaft Specifications


Application	CVT
Joint type	Wheel side		Transaxle side
	(LH)	(RH)	(LH)	(RH)
Grease amount*	85 - 105 g (3.00 - 3.70 oz)		130 - 140 g (4.59 - 4.94 oz)
Molykote M77 lubricant*	1.0 - 3.0 g (0.04 - 0.11 oz)
Boot installed length (L)	93.50 mm (3.681 in)		87.10 mm (3.429 in)

*: Always check with the Parts Department for the latest parts information.

Dynamic Damper Specifications

Unit: mm (in)


Dimension (A)	240.1 - 246.1 (9.45 - 9.69)	230.10 - 236.10 (9.06 - 9.30)	238.80 - 244.80 (9.40 - 9.64)	228.80 - 234.80 (9.01 - 9.24)

Application

M/T

CVT

(LH)

(RH)

(LH)

(RH)

Dimension (A)

240.1 - 246.1

(9.45 - 9.69)

230.10 - 236.10

(9.06 - 9.30)

238.80 - 244.80

(9.40 - 9.64)

228.80 - 234.80

(9.01 - 9.24)

Boot Band Specification

Unit: mm (in)


Dimension (A) - maximum	7.0 (0.276)

 Cvt

Exploded View (lh) Exploded View (LH) LH 1. Circular clip 2. Slide joint housing 3. Snap ring 4. Spider assembly 5. Boot band 6. Shaft 7. Joint-sub assembly 8. Boot Wheel side D...

 Rear Axle. Precaution. Precautions. Precaution for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner"

Precautions. Precaution for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner" Precaution for Supplemental Restraint System (srs) &q...

Other materials:

P0746-00 Pressure Control Solenoid a
Dtc Description DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection conditi ...

Normal Operating Condition
Symptom Description Symptom Description FUEL CUT CONTROL (AT NO LOAD AND HIGH ENGINE SPEED) If the status of that the engine speed is above 2,500 rpm under no load (at 0 km/h and the selector lever position is P or N) takes more than the specified time, fuel will be cut off after s ...

P0117 Ect Sensor
Dtc Description DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition ...