Nissan Sentra manuals

Nissan Sentra B18 (2020-2025) Service Manual: Flasher

Consult Function (bcm - Flasher)

CONSULT Function (BCM - FLASHER)

DATA MONITOR

Note:

The following table includes information (items) inapplicable to this Nissan Sentra vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor item

[Unit]

Description

HAZARD SW

[Off/On]

The switch status input from the hazard switch

Battery voltage (flasher)

[Off/On]

Indicated [ON/OFF] condition of battery power supply (turn signal lamp) status

ACTIVE TEST

Test item

Operation

Description

FLASHER

LH

  • Outputs voltage to blink the turn signal lamp LH

  • Transmits the turn indicator signal to the combination meter via CAN communication to blink the turn signal indicator lamp and outputs the turn signal operating sound to the integrated buzzer

RH

  • Outputs voltage to blink the turn signal lamp RH

  • Transmits the turn indicator signal to the combination meter via CAN communication to blink the turn signal indicator lamp and outputs the turn signal operating sound to the integrated buzzer

LH/RH

  • Outputs voltage to blink the turn signal lamp LH and turn signal lamp RH

  • Transmits the turn indicator signal to the combination meter via CAN communication to blink the turn signal indicator lamp and outputs the turn signal operating sound to the integrated buzzer

Wiper
Consult Function (bcm - Wiper) CONSULT Function (BCM - WIPER) DATA MONITOR Note: The following table includes information (items) inapplicable to this Nissan Sentra vehicle. For info ...

Intelligent Key
Consult Function (bcm - Intelligent Key) CONSULT Function (BCM - INTELLIGENT KEY) DATA MONITOR Note: The following table includes information (items) inapplicable to this Nissan Sent ...

Other materials:

Steering column
Exploded View Steering column assembly Slide plates lower shaft assembly Removal and Installation REMOVAL CAUTION: While removing the steering column assembly, do not unlock the tilt lever. Do not impact on the axis when removing steering column assembly. ...

Dtc Description
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition ...

Precautions for Work
Precautions for Work When removing or disassembling each component, be careful not to damage or deform it. If a component may be subject to interference, be sure to protect it with a shop cloth. When removing (disengaging) components with a screw ...

В© 2014-2026 Copyright www.nisentra.com