Diagnosis ProcedureEvap leak check
Inspection
CAUTION:
Do not use compressed air or a high pressure pump.
Do not exceed 4.12 kPa (0.042 kg/cm2, 0.6 psi) of pressure in EVAP
system.
NOTE:
Do not start engine.
Improper installation of EVAP service port adapter [commercial
service tool: (J-41413-OBD)] to the EVAP
...
Removal and Installation
Removal and Installation
Warning:
Before servicing the SRS, place the ignition
switch in the OFF position, disconnect both battery terminals then
wait at least three minutes.
The front side air bag module is
serviced as part of the front seatback assembly. For remova ...
Commercial Service Tool
Commercial Service Tool
(TechMate No.)
Tool name
Description
(NI-39699I)
Refrigerant Weight Scale
...