Nissan Sentra manuals

Nissan Sentra Owners Manual: Engine oil

Changing engine coolant
A NISSAN dealer can change the engine coolant. The service procedure can be found in the NISSAN Service Manual. Improper servicing can result in reduced heater performance and engine overheati ...

Checking engine oil level
Park the vehicle on a level surface and apply the parking brake. Start the engine and let it idle until it reaches operating temperature. Turn off the engine. Wait more than 10 minute ...

Other materials:

C1601 Battery power supply
DTC Logic DTC DETECTION LOGIC DTC Display item Malfunction detected condition Possible cause C1601 BATTERY VOLT When a power supply voltage to the EPS control unit is maintained at 17.5 V or more or at less than 9 V continuously for five second or more. ...

Precaution
Precautions for Trouble Diagnosis Caution: Follow the instructions listed below. Failure to do this may cause damage to parts: Never apply 7.0 V or more to the measurement terminal. Use a tester with open terminal voltage of 7.0 V or less. Turn the ignition switch off and disconnect the ...

Brake pedal position switch
Component Function Check 1.CHECK BRAKE PEDAL POSITION SWITCH FUNCTION With CONSULT Turn ignition switch ON. Select “ENGINE” using CONSULT. Select “BRAKE SW1” in “DATA MONITOR” mode. Check “BRAKE SW1” indication under the following conditions. ...

© 2014-2026 Copyright www.nisentra.com