Nissan Sentra B18 (2020-2025) Service Manual: Dtc Index
|
DTC |
Display item |
EPS warning lamp |
Refer to |
|---|---|---|---|
|
C1601-16 |
BATTERY VOLT |
ON |
DTC Description |
|
C1601-17 |
BATTERY VOLT |
ON |
DTC Description |
|
C1604-96 |
TORQUE SENSOR |
ON |
DTC Description |
|
C1606-96 |
EPS MOTOR |
ON |
DTC Description |
|
C1608-43 |
CONTROL UNIT |
ON |
DTC Description |
|
C1608-44 |
CONTROL UNIT |
ON |
DTC Description |
|
C1608-45 |
CONTROL UNIT |
ON |
DTC Description |
|
C1608-46 |
CONTROL UNIT |
ON |
DTC Description |
|
C1608-49 |
CONTROL UNIT |
ON |
DTC Description |
|
C1608-54 |
CONTROL UNIT |
ON |
DTC Description |
|
C161A-82 |
ABS system |
OFF |
DTC Description |
|
C161A-83 |
ABS system |
OFF |
DTC Description |
|
C161A-86 |
ABS system |
OFF |
DTC Description |
|
C161B-86 |
ABS system |
OFF |
DTC Description |
|
C161B-87 |
ABS system |
OFF |
DTC Description |
|
C161C-82 |
ST angle sensor system |
OFF |
DTC Description |
|
C161C-83 |
ST angle sensor system |
OFF |
DTC Description |
|
C161C-86 |
ST angle sensor system |
OFF |
DTC Description |
|
C161C-87 |
ST angle sensor system |
OFF |
DTC Description |
|
C161E-86 |
ABS system |
OFF |
DTC Description |
|
C1621-86 |
BCM system |
OFF |
DTC Description |
|
C1621-87 |
BCM system |
OFF |
DTC Description |
|
C1623-87 |
ECM system |
OFF |
DTC Description |
|
C1624-00 |
Signal connector |
OFF |
DTC Description |
|
C1629-87 |
IPDM E/R system |
OFF |
DTC Description |
|
C1630-87 |
CAN COMM CIRCUIT |
OFF |
DTC Description |
|
DTC |
Display item |
EPS warning lamp |
Refer to |
|---|---|---|---|
|
U0073-00 |
Control module comm bus "A" Off |
ON |
DTC Description |
|
U2140-87 |
CAN comm err (ECM) |
OFF |
DTC Description |
|
U2148-87 |
CAN comm err (brake control unit) |
OFF |
DTC Description |
|
U214F-87 |
CAN comm err (BCM) |
OFF |
DTC Description |
|
U2156-87 |
CAN comm err (steering angle sensor) |
OFF |
DTC Description |
|
U215B-87 |
CAN comm err (IPDM E/R) |
OFF |
DTC Description |
If two or more DTCs are detected, refer to DTC Inspection Priority Chart.
Dtc Inspection Priority Chart
DTC Inspection Priority Chart
When multiple DTCs are detected simultaneously,
check one by one depending on the following priority list:
...
Other materials:
A-bag branch line circuit
Diagnosis procedure
Warning:
Always observe the following items for preventing accidental
activation.
Before servicing, turn ignition switch off, disconnect battery
negative terminal, and wait 3 minutes
or more. (To discharge backup capacitor.)
Never use unspecified tester or other me ...
Clutch Disc
Clutch Disc
Unit: mm (in)
Facing size (Outer dia. x
Inner dia. x Thickness)
230 x 155 x 3.2
(9.06 x 6.10 x 0.126)
Runout limit/diameter of the
...
Ecm branch line circuit
Diagnosis procedure
1.Check connector
Turn the ignition switch off.
Disconnect the battery cable from the negative terminal.
Check the terminals and connectors of the ecm for damage, bend and loose
connection (unit side and
connector side).
Is the inspection result normal?
Yes > ...
