Nissan Sentra B18 (2020-2025) Service Manual: Dtc Diagnosis Procedure
The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information.
-
Activate and display TPMS sensor IDs
-
Display tire pressure reported by the TPMS sensor
-
Read TPMS DTCs
-
Register TPMS sensor IDs
-
PERFORM SELF DIAGNOSTIC RESULT
-
CONSULTReplace front right tire pressure sensor even if other DTCs are displayed along with “C1732-16” in "Self Diagnostic Result" mode of “BCM(AIR PRESSURE MONITOR)”.
Replace front right tire pressure sensor. Refer to Removal and Installation.
-
Dtc Confirmation Procedure
DTC Confirmation
Procedure
PERFORM DTC CONFIRMATION
CONSULT
Drive the Nissan Sentra vehicle at 25 MPH (40 km/h) or mor ...
Other materials:
Exhaust Manifold
Exploded View
Exploded View
1.
Air fuel ratio (A/F) sensor
1
2.
Exhaust manifold cover
...
A-bag branch line circuit
Diagnosis procedure
Warning:
Always observe the following items for preventing accidental
activation.
Before servicing, turn ignition switch off, disconnect battery
negative terminal, and wait 3 minutes
or more. (To discharge backup capacitor.)
Never use unspecified tester or other ...
Dtc Diagnosis Procedure
DTC Diagnosis Procedure
PERFORM SELF DIAGNOSTIC RESULT
CONSULT
Ignition switch ON.
Select “Self Diagnostic Result” mode
of “ABS”.
...
