Nissan Sentra manuals

Nissan Sentra B18 (2020-2025) Service Manual: Dtc Diagnosis Procedure

DTC Diagnosis Procedure Note:

The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information.

  1. PERFORM SELF DIAGNOSTIC RESULT

    1. CONSULT

      Replace front left tire pressure sensor even if other DTCs are displayed along with “C1731-16” in "Self Diagnostic Result" mode of "BCM(AIR PRESSURE MONITOR)".

    >>

    Replace front left tire pressure sensor. Refer to Removal and Installation.

Dtc Confirmation Procedure
DTC Confirmation Procedure PERFORM DTC CONFIRMATION CONSULT Drive the Nissan Sentra vehicle at 25 MPH (40 km/h) or mor ...

C1731-68 Tire Pressure Sensor Fl
...

Other materials:

Ball Joint Axial End Play
Ball Joint Axial End Play Axial end play 0.4 mm (0.020 in) or less ...

Precautions for Work
Precautions for Work When removing or disassembling each component, be careful not to damage or deform it. If a component may be subject to interference, be sure to protect it with a shop cloth. When removing (disengaging) components with a screw ...

C106b-64 Stop Lamp Switch
Dtc Description DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen item (Trouble diagnosis content) DTC detection condition ...

© 2014-2026 Copyright www.nisentra.com