S Nissan Sentra Manuals Library
Factory-style information for owners and repair work

Nissan Sentra techinfo

Find Nissan Sentra owner information, maintenance instructions, technical references, service procedures and useful repair pages in one clean online library.

Quick access Sentra Docs
B18 Owner's 2020-2025 Sentra owner information B18 Service 2020-2025 Sentra Workshop manual B17 Owner's 2013-2019 Sentra owner documentation B17 Service 2013-2019 Sentra service information

Nissan Sentra B18 (2020-2025) Service Manual: C1731-16 Tire Pressure Sensor Fl

Dtc Description

DTC Description

Note:

The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information.

  • Activate and display TPMS sensor IDs

  • Display tire pressure reported by the TPMS sensor

  • Read TPMS DTCs

  • Register TPMS sensor IDs

DTC DETECTION LOGIC

DTC No.

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

C1731-16

Tire pressure sensor FL

(Tire pressure sensor front left)

Diagnosis condition

Drive at a speed of 25 MPH (40 km/h) or more reaches 10 minutes in total.

Signal (terminal)

Tire pressure sensor signal.

Threshold

Front left tire pressure sensor battery voltage is low.

Diagnosis delay time

2 second or more.

POSSIBLE CAUSE

Front left tire pressure sensor

FAIL-SAFE

—

Dtc Confirmation Procedure

DTC Confirmation Procedure

  1. PERFORM DTC CONFIRMATION

    1. CONSULT

      1. Drive the Nissan Sentra vehicle at 25 MPH (40 km/h) or more reaches 10 minuets in total.

        Note:

        Avoid driving in areas with radio interference.

      2. Stop the Nissan Sentra vehicle.

      3. Select “Self Diagnostic Result” mode of “BCM(AIR PRESSURE MONITOR)".

    Is DTC “C1731-16” detected?

    YES>>

    Refer to DTC Diagnosis Procedure.

    NO>>

    To check malfunction symptom before repair: Refer to Intermittent Incident.

    NO>>

    Confirmation after repair: Inspection End.

Dtc Diagnosis Procedure

DTC Diagnosis Procedure

Note:

The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information.

  • Activate and display TPMS sensor IDs

  • Display tire pressure reported by the TPMS sensor

  • Read TPMS DTCs

  • Register TPMS sensor IDs

  1. PERFORM SELF DIAGNOSTIC RESULT

    1. CONSULT

      Replace front left tire pressure sensor even if other DTCs are displayed along with “C1731-16” in "Self Diagnostic Result" mode of "BCM(AIR PRESSURE MONITOR)".

    >>

    Replace front left tire pressure sensor. Refer to Removal and Installation.

    C1714-7b Low Tire Pressure Rr
    Dtc Description DTC Description Note: The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additio...
    C1731-68 Tire Pressure Sensor Fl
    Dtc Description DTC Description Note: The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additio...

    Other materials:

    B0050-29 Front Seat Belt Buckle Switch
    Dtc Description DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC detecting condition ...

    Trunk Opener Request Switch
    Component Function Check Component Function Check CHECK FUNCTION CONSULT Select "Request switch BD/TR" in "Data Monitor" mode of "BCM(TRUNK)". Select that the functi ...

    High Pressure Fuel Pump
    Component Function Check Component Function Check CHECK HIGH PRESSURE FUEL PUMP FUNCTION With CONSULT Start engine. Select “FUEL PRES SEN V” in “DATA MONITOR” mode of “ENGINE” usi ...