Nissan Sentra B18 (2020-2025) Service Manual: Dtc Confirmation Procedure
-
DTC CONFIRMATION
-
CONSULT-
Ignition switch ON and wait for 2 seconds or more.
-
Select “Self Diagnostic Result” mode of “BCM”.
-
Is DTC detected?
YES >>Refer to DTC Diagnosis Procedure.
NO >>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO >>Confirmation after repair: Inspection End.
-
Dtc Description
DTC Description
DESCRIPTION
CAN (Controller Area Network) is a serial communication
line for real time applications. It is an on-Nissan Sentra vehicle multiplex communication
line with hig ...
Dtc Diagnosis Procedure
DTC Diagnosis
Procedure
CHECK CAN COMMUNICATION
Check CAN communication. Refer to CAN Communication Signal Chart.
Is DTC “U0073–00 ...
Other materials:
Passenger Side
Exploded View
Exploded View
1.
Headrest
2.
Headrest holder (locked)
3.
...
Camshaft
Exploded View
Camshaft position sensor (EXH)
O-ring
Camshaft bracket
Camshaft (EXH)
Camshaft sprocket (EXH)
Camshaft sprocket (INT)
Camshaft (INT)
Valve lifter (EXH)
Valve lifter (INT)
Signal plate (INT)
Signal plate (EXH)
O-ring
Camshaft position sensor (INT)
A. ...
Sensor power supply 2 circuit
Description
ECM supplies a voltage of 5.0 V to some of the sensors systematically divided
into 2 groups, respectively.
Accordingly, when a short circuit develops in a sensor power source, a
malfunction may occur simultaneously
in the sensors belonging to the same group as the shorted-circui ...
