Nissan Sentra B18 (2020-2025) Service Manual: Dtc Confirmation Procedure

Nissan Sentra B18 (2020-2025) Service Manual / Electrical & Power Control / Body Control System :: Dtc/circuit Diagnosis / B2c95-64 Combination Switch / Dtc Confirmation Procedure

DTC Confirmation Procedure

DTC CONFIRMATION
1. CONSULT
  1. Erase DTC.
  2. Ignition switch OFF.
  3. Select “Self Diagnostic Result” mode of "BCM", when 2 seconds or more has passed after the ignition switch is placed OFF (auto ACC status).
Is DTC detected?
YES >>
Refer to DTC Diagnosis Procedure.
NO >>
To check malfunction symptom before repair: Refer to Intermittent Incident.
NO >>
Confirmation after repair: Inspection End.

Dtc Description

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis cont ...

Dtc Diagnosis Procedure

DTC Diagnosis Procedure CHECK COMBINATION SWITCH SYSTEM SYMPTOMS Perform COMBINATION SWITCH SYSTEM SYMPTOMS. Refer to Symptom Table. ...

Other materials:

Tcu
Removal and Installation Removal and Installation REMOVAL Note: Before replacing TCU, perform "SAVE VIN DATA" to save current Nissan Sentra vehicle specification. For details, refer to Description. When replacing the TCU, a new TCU must be used. ...

P0335 CKP Sensor (POS)
DTC Logic DTC DETECTION LOGIC NOTE: If DTC P0340 is displayed with DTC P0643, first perform the trouble diagnosis for DTC P0643. Refer to EC- 353, "DTC Logic". DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition Possible cause ...

Precaution for Work
When removing or disassembling each component, be careful not to damage or deform it. If a component may be subject to interference, be sure to protect it with a shop cloth. When removing (disengaging) components with a screwdriver or similar tool, be sure to wrap the component with a ...