Nissan Sentra manuals

Nissan Sentra B18 (2020-2025) Service Manual: Dtc Confirmation Procedure

DTC Confirmation Procedure

  1. PERFORM DTC CONFIRMATION PROCEDURE

    1. CONSULT

      1. Ignition switch ON.

      2. Turn heated seat switch LH (LOW) ON.

      3. Select “Self Diagnostic Result” mode of “HVAC”.

    Is B24AF–14 detected?

    YES >>

    Refer to DTC Diagnosis Procedure.

    NO >>

    To check malfunction symptom before repair: Refer to Intermittent Incident.

    NO >>

    Confirmation after repair: Inspection End.

Dtc Description
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis name ...

Dtc Diagnosis Procedure
DTC Diagnosis Procedure CHECK FUSE Ignition switch OFF. Check that the following fuse is ...

Other materials:

Diagnosis Procedure
Diagnosis Procedure CHECK INTELLIGENT KEY SYSTEM SYMPTOM TABLE Check Intelligent Key system symptom table. Refer to Diagnosis Procedure. >> GO TO 2. CHECK INTELLIGENT KEY OUTPUT ...

Diagnosis system [abs actuator and electric unit (control unit)]
CONSULT Function (ABS) FUNCTION CONSULT can display each diagnostic item using the following direct diagnostic modes. Direct Diagnostic Mode Description ECU identification The ABS actuator and electric unit (control unit) part number is displayed. Self Diagnos ...

Fuses
Two types of fuses are used. Type A is used in the fuse boxes in the engine compartment. Type B is used in the passenger compartment fuse box. Type A fuses are provided as spare fuses. They are stored in the passenger compartment fuse box. Type A fuses can be installed in the engine com ...

© 2014-2026 Copyright www.nisentra.com