Nissan Sentra B18 (2020-2025) Service Manual: Dtc Confirmation Procedure
-
TIRE PRESSURE SENSOR ID REGISTRATION
-
Perform tire pressure sensor ID registration. Refer to Work Procedure.
GO TO 2.
-
-
PERFORM DTC CONFIRMATION
-
CONSULT-
Drive the Nissan Sentra vehicle at 25 MPH (40 km/h) or more reaches 10 minuets in total.
Note:
Avoid driving in areas with radio interference.
-
Stop the Nissan Sentra vehicle.
-
Select “Self Diagnostic Result” mode of “BCM(AIR PRESSURE MONITOR)”.
-
Is DTC “C1742-21” detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
-
Dtc Description
DTC Description
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional information.
...
Dtc Diagnosis Procedure
DTC Diagnosis
Procedure
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional informatio ...
Other materials:
Normal Operating Condition
Description
Description
RELATED TO NOISE
The majority of the audio concerns are the result
of outside causes (bad CD, electromagnetic interference,
etc.).
The following noise results from variations in
field strength, such as fading noise and multi-path noise, or
external no ...
Bulb or Lens Replacement
Bulb or Lens Replacement
Warning:
Do not touch bulb while it is lit or right after
being turned OFF. Burning may result.
CAUTION:
Do not attempt to separate the vanity mirror lamp
from the sun visor or damage to the components may occur.
...
Exploded View
Exploded View
1.
Seat belt height
adjuster
2.
Seat belt height adjuster
cover
...
