Nissan Sentra B18 (2020-2025) Service Manual: Dtc Confirmation Procedure
-
PERFORM DTC CONFIRMATION
-
CONSULT-
Ignition switch ON.
CAUTION:
Never start the engine.
-
Check the tire pressure for all wheels and adjust to the specified value. Refer to Tire Air Pressure.
-
Select “Self Diagnostic Result” mode of “BCM(AIR PRESSURE MONITOR)”.
-
Drive the Nissan Sentra vehicle at 25 MPH (40 km/h) or more reaches 10 minuets in total.
-
Is DTC “C1712-7B" detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
-
Dtc Description
DTC Description
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional information.
...
Dtc Diagnosis Procedure
DTC Diagnosis
Procedure
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional informatio ...
Other materials:
Common Item
Consult Function (bcm - Common Item)
CONSULT Function (BCM - COMMON ITEM)
BCM
Refer to CONSULT Function (BCM - COMMON ITEM).
...
Precaution for Brake System
Precaution for Brake System
Warning:
Clean any dust from the front brake and the rear
brake using a vacuum dust collector. Do not blow by compressed
air.
Use the correct brake fluid. Refer to Fluids and Lubricants.
Do not reuse drained brake f ...
Rear Door Alert
The Rear Door Alert system in the Nissan Sentra operates under specific conditions
to help remind the driver that an object or passenger may be present in the rear
seat(s). Always visually check the rear seat area before exiting the vehicle.
By default, the Rear Door Alert system is disabled.
...
